Loading ...

About us

About us

What represents us

News

Solutions for

Home

Catalogues

Contact us

Cookies Policy

Privacy Policy

N°REA:MI-1733959|CF-PIVA:IT04232250961|Share capital:119.000,00

Cables with screw terminal

^

Silver Range from 0 to 50kg

^

Yellow Range from 0 to 90kg

Silver Range from 0 to 50kg

CL (kg) = Static working load expressed in kg safety factor CLIP 3 : 1 / ZIP 5 : 1

CodeReferencePieces per packageL (m)ScrewCL (kg)
ZCT2405PLTRK2S/M6X45102M6x4550
| |

ZCT2410PLTRK3S/M6X45103M6x4550
| |

ZCT2420PLTRK5S/M6X45105M6x4550
| |

Yellow Range from 0 to 90kg

CL (kg) = Static working load expressed in kg safety factor CLIP 3 : 1 / ZIP 5 : 1

CodeReferencePieces per packageL (m)ScrewCL (kg)
ZCT2435PLTRK2Y/M8X25102M8x2590
| |

ZCT2440PLTRK3Y/M8X25103M8x2590
| |

ZCT2450PLTRK5Y/M8X25105M8x2590
| |

Note: including wire and clip suspension kit
For special demands range available in matt black upon request.

Installation Notes:
• For use on concrete with brass anchors (Fischer PO type)
• Install the anchor following the manufacturer's instructions
• Make sure it is correctly inserted into the hole then tighten the M6 ​​/ M8 screw
• Use the correct equipment for installation
• Pass the cable through the clip in the direction indicated by the arrow
• Pass the cable through or around the object to be suspended and then back through the clip, leaving the cable protruding approximately 15cm from the opposite side
• The screw can also be used in reverse by screwing it into the product to be suspended
• Always check that the cable is locked inside the clip by pushing the pin in the opposite direction to that indicated by the arrows

Related products