Spring clip for profile slots
ATTENTION: the system MUST NOT be overloaded
- Ensure that the load is placed evenly on the profile
- Do not use for support of armoured cables
- Do not use under dynamic loads or exposed to vibration
Installation notes:
• Insert the bracket inside the slot of the profile leaving the short end on the external side of the profile
• Pass the cable inside the clip in the direction indicated by the arrow and then through the bracket
• Go up the cable into the free hole of the clip, making it come out 15cm from the opposite side
• Always check that the cable is locked inside the clip by pushing the pin in the opposite direction to that indicated by the arrows
• Insert the bracket inside the slot of the profile leaving the short end on the external side of the profile
• Pass the cable inside the clip in the direction indicated by the arrow and then through the bracket
• Go up the cable into the free hole of the clip, making it come out 15cm from the opposite side
• Always check that the cable is locked inside the clip by pushing the pin in the opposite direction to that indicated by the arrows
CL (kg) = Static working load expressed in kg safety factor CLIP 3 : 1 / ZIP 5 : 1
← | → | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Code | Reference | Pieces per package | Description | CL (kg) | |||||||||||
| ZCT2225 | CH1-PRF | 10 | Bracket for profile slot | 20 | |||||||||||
