Tool for DIN rails

Technical Characteristics
Cutting and punching of standardised rails and profiles.
Cutting is carried out without generating scrap or deformation of the bar and is clean and right-angled.
Profile
Description
Ref.
Processing
Type Ω 15 x 5.5
i
Cutting
Type Ω 35 x 7.5
ii
Cutting - Punching
Type Ω 35 x 15
iii
Cutting - Punching
Type G 32 x 15
iv
Cutting
Type C 30 x 15
v
Cutting
For cutting:
Symmetrical DIN rails type “Ω” 15×5,5 – 35×7,5 – 35×15,
Asymmetric DIN rail type “G” 32×15 and symmetrical “C” profile 30×15.
Symmetrical DIN rails type “Ω” 15×5,5 – 35×7,5 – 35×15,
Asymmetric DIN rail type “G” 32×15 and symmetrical “C” profile 30×15.
For punching with slotted hole:
Symmetrical DIN rails type “Ω” 35×7,5 – 35×15.
Slotted hole 12×6,4 longitudinal or perpendicular to the length of the guide.
– Use with DIN rails not present in the TEKNOMEGA catalog is not guaranteed.
– For maintenance instructions, see the instruction and use document
← | → | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Code | Reference | Pieces per package | Weight (kg) | ||||||||||||
UTD3005 | UTD-tp 03 | 1 | 16.5 | ||||||||||||
Related products

The ΩWARE software facilitates the sizing of the electrical panel, saves time and minimizes the possibility of error
